ST 85 is a hard-wearing, decontaminable professional half-mask. It is ideal for protecting operators handling harmful chemicals, toxic gases, solvents and dusts. It can be used in the chemical industry.
The four quick-adjust buckles and the anatomical shape of the face piece enable the half-mask to adapt easily to the user's face.
ST 85 is fitted with a screw fitting to EN 148-1.
ST 85 can be used with Spasciani's standard Blue Line threaded filters, models 100, 200, 201 and 202 A2P3. It can also be used with Blue Line series filters, models 202, 203 and 204, but only by using a filter holder with shoulder strap and a TUR 60 or TUR 90 corrugated hose.
Cartridges can also be combined with special pre-filters to prevent them from clogging too quickly in very dusty environments.
Filter not included.
Limits of use:
Respirators with filters may not be used in environments where the concentration of oxygen is less than 17% by volume.
The ST 85 half-mask may only be used with filters weighing less than 300 g.
Classification:
Half-mask to EN 140:1998 complies with directive 89/686/EC (PPE)
Marking:
Half-skirt: EPDM
Flange set: Elastic tape
Nuchal arch: Molded polypropylene
BV 57-type diaphragm exhalation valve: Rubber membrane placed on a plastic support and protected by a snap cover
Bayonet fasteners: Shock- and solvent-resistant plastic
Storage:
Store between -20°C and + 50°C and RH <80%.
| Title2 | ST 85 |
|---|
